Our companytype A has eight types of machine numbers:
NO3.15,3.55,4,4.5,5,5.6,6.3,7.1
Our company type D has Fivetypes of machine numbers:
NO7.1,8,10,12.2,12.5

This fan can be made into two types:right-handed and left-handed, called a right cyclone fan.Using "right"to indicate counterclockwise rotation of the impeller is called a left cyclone,and using "left"to indicate.

The outlet  position of thefan is represented by the outlet angleof  the casing.The9-19 type fan NO3.15-7.1 is manufactured in various types and can be installed in the required  position according to the require ments of the user.The adjustment range of the air outlet  position is 0°~225°,with an interval of 22.5°or45°,which is atotal of six types(0°, 45°,90°135°,180°,225°).NO7.1 Create adirectional angle based on user needs

The transmission mode of the fanisAtype and D type.

Thereare thirteen types of machine numbers in our factory.
 NO2.8,3.2,3.6,4,4.5,5,5.6,6,6.3,7.1,8,10,12

This fan canbe made into two types right-handedand left-handed.The impeller rotates dockwise and is called a right cydlone.Represented by "right",the impeller rotates counterclockwise and is called a left cyclone,represented by "left"

The outlet position of the fanis represented by the outlet angle of the casing. 4-72NO6-10 is made into various types when leaving the factory,and can be installed in the required position according to the requirements of the user.The adjustment range of theair outlet position is 0°to 225°,with an interval of 22.5° or 45°,which is a total of six types (0°,45°,90°,135°,180°,225).NO6-12 is made into adirectional angle accordingtouserneeds.

Thetransmission mode ofthefan is C-type

The 4-72A Stainless Steel centrifugal fan has high operating efficiency and its design has been unanimously recognized by customers.

Industry used:environmental protection equipment,coating machines,food，machinery,printing industry,pharmaceutical machinery,drying equipment, ceramic machinery,etc.

Place of use:Widely used in large and medium-sized factories and civil buildings,large shopping malls,power plants,airtreatment equipment,and hot air circulation supporting facilities.Transporting non flammable, explosive,and non corrosive gas media.No viscous substances are allowed in the air containing dust,and the amount of dust particles contained shall not exceed 150mg/m³,If small particle materials are transported,the service life of the fan blade impeller will be shortened.

According to the usage environment,it is recommendedto use atemperature range of 200℃-500℃

The 9-19A Stainless Steel high-pressure centrifugal fan,compared with similar fans at home and abroad,has high efficiency,low noise,flat performance curve,and wide efficiency area.

 This fan is generally used for forging furnaces and high-pressure forced ventilation,and can be widely used for material transportation.It is also suitable for conveyingair and non corrosive,unnatural,and non viscous gases.The medium temperature generally does not exceed 50℃ (up to 80°0),and the dust and hard particles contained in the medium are not morethan 150mg/m3.It can completely replace low rate 8-18 and 9-27 fans.